Technology

How to Properly Mount a Ceiling Fan

If I had to guess, you’re a do-it-yourselfer who saw the light and installed some ceiling fans. You’ve undoubtedly researched the benefits of installing ceiling fans and found out that several perks have an excellent effect on your pocketbook, in addition to the aesthetic appeal that is part and parcel of a ceiling fan.

Experts have calculated that by installing a ceiling fan in a room, the temperature will feel 7 degrees cooler than it actually is, resulting in a 35% to 45% decrease in cooling expenses. During the colder months, you can save money on heating costs by reversing the fan blades to push warm air down from the ceiling. Most professionals agree you can save your heating costs by eight to twelve percent.

It sounds like you’ve decided to put in ceiling fans. The following step is to settle on a specific make, model, etc., to purchase. Check the facts. Determine which companies have been producing ceiling fans for the most extended period. What matters more than whatever ceiling fan brand sells the most units is how satisfied customers are with those brands. You can find helpful information online, but be aware of commercial pitches masquerading as endorsements. Because this article is meant to focus more on the installation end of the ceiling fan than what to buy, my favorite is Westinghouse, for various reasons that I won’t get into.

But before I move on from the topic of what to buy, a few words of caution. You shouldn’t go into this buy thinking, “How much can I save on these?” Manufacturers of low-priced devices are improving at making their wares appear good. The quality of a ceiling fan is judged by how well it holds up over time and how much wear and tear it can take before breaking. Thin, low-quality materials are typically used to construct cheap fan housings.

The motor housing can begin to exhibit indications of wear after a few years, typically manifesting as vibrations and other noises. The only solution is to buy another fan, which is like throwing good money after bad. In addition, the blades of low-priced fans are frequently fabricated from defective materials that quickly deform and become unbalanced. While a quick cure may be possible, the underlying issue will persist and create ongoing discomfort regardless of how often you attempt to address it.

Keep the following in mind while searching for the ideal fan(s). The room’s dimensions will dictate how wide a blade is a need. The length of the blades varies from 29″ to 56″. A room no bigger than 50 square feet can use the shortest blade span, while a room between 70 and 80 square feet will benefit from the largest blade span. The minimum recommended blade span for a ceiling fan in a 100-square-foot room is 42 inches; for rooms more significant than 100 square feet, the maximum recommended blade spread is 60 inches.

To maximize airflow, the blade’s pitch should be around 14 degrees.

Lighting is a standard feature of many modern fans. You should consider the room’s purpose and size before purchasing a fan with lights. Most manufacturers provide models of ceiling fans that may be converted to lit fixtures by adding a lighting kit.

Finally, invest in a ceiling fan that can be reversed for cooling and heating.

A good rule of thumb is to mount the fan so that the blades are seven feet from the ground and a foot from the ceiling. Select a hugger-style fan for rooms with lower ceilings. If your ceiling is exceptionally high, buy a down rod to bring the fan closer to the ground.

Okay. It’s time to address the fundamental problems that must be solved before items can be placed where they belong and begin performing their intended functions.

You’ve invested in fan(s). Check the components you remove from the box against the manufacturer’s list (often an exploded drawing) to ensure you have everything you need. Ensure you have all the required components by laying them out and checking them off. Put the components somewhere else to avoid making a mess when you begin installing the fan.

Before beginning the task, make sure you have everything you need. A stepladder, appropriate screwdrivers, pliers, a tool to strip wires, a circuit tester, a ceiling box, a hammer, and a saw to cut an aperture in the drywall are all part of the equipment list. Keep your toolbox close by in case you unexpectedly find yourself in need of a specific tool or part. Reading the installation instructions from start to finish is the best approach to be sure you have everything you need before you begin.

If you’re lucky, there’ll already be a ceiling box in the room’s middle that’s being used for a light fixture. In most cases, you’ll need to install a brand-new ceiling box made to install a fan. Because of their heavier weight compared to typical light fixtures, ceiling fans may need to be reinforced. You will need to buy a new ceiling box and mounting brackets in addition to the ones that came with the fan if you don’t already have them. If you don’t feel confident handling electrical work, it’s best to employ a professional electrician. The first important thing to consider is whether the ceiling box can hold the ceiling fan. The required support can be obtained from a brace (mounting bracket) installed between ceiling joists.

However, if the room does not have a centrally positioned ceiling box, electrical wiring must be extended from the nearest power source to the middle of the space. The procedures involved are too involved to be covered here. However, they typically include hiring a professional electrician.

The instructions with your ceiling fan should go into great detail about how to mount it safely.

Be sure to turn off the circuit breaker or fuse for the room at its source. Make sure the circuit is broken by testing it with a circuit tester. It may be necessary to use an extension cord to bring a light fixture from another section of the house into a room with insufficient natural light.

If you want to install the fan correctly, read the handbook and follow the directions carefully. Remember that this is usually a task for two people. Ensure there is enough space between the blades and the ceiling before installing the motor, even though this isn’t explicitly stated in the instructions. If not, attach the motor to the power supply without attaching the blades to the motor arms.

Evenly tighten the screws holding the blades in place; this is so important that it might not even be addressed in the handbook.

Now that the fan is in place, you should ensure it works properly. Power up and flip on the ceiling fan. It may wobble a little once it gets going, even though the maker should have ensured the blades were all the same weight and at the same angle. If this is the case, you should unplug the fan and double-check the screws holding the blades to see if they’re adequately tightened. Check the blades’ alignment by manually rotating them while holding a yardstick vertically against the edge of one of them. If the blade is not correctly aligned, gently bending it up or down can do the trick.

If the swaying continues, it’s probably because one or more blades are significantly heavier than the others. Ceiling fans often come with weight-balancing attachments from the manufacturer. These clips are meant to be attached to the top of the blade to make it heavier. The lighter the clip, the closer it should be to the motor housing. Achieve a steady image by adjusting the clip(s). Clips for counterbalancing the weight of heavy objects can be obtained separately at any hardware store, home improvement center, or lighting retailer.

You may expect years of comfort and enjoyment from your ceiling fan if it is in good working order.

Lighting and Fans at LightnBreezy.com [http://www.lightnbreezy.com/] There are a plethora of items available on LightnBreezy.com. Discount ceiling fans and remote controls can be purchased at LightnBreezy.com at the following link:

admin